This item has been SOLD

Scott Heavy Duty Index Tabcutting Machine – 041824435006A

S/N: 77-53079


  • Fast and Easy Setups
  • It takes just seconds to change tab positions. Changing tab sizes takes only two minutes.
  • Handles Many Size Sheets
  • The extra long steel knives quickly and easily cut a 1 inch (25.4mm) tab in the first position on a 15 inch long sheet.
  • Precision Cut a Variety of Tab and Step Cuts.
  • Adjust tabs to any width from 1/2 inch to 6 inches
  • (12.7mm to 152.4mm) by simply moving knives closer or father apart.
  • Safe and Easy Operation
  • The full length safety bar protects the operator’s fingers from knives while rapidly inserting sheet after sheet.
  • Proven Durability
  • Knives are made from tool steel, hardened and precision ground. They are mounted on 2 inch diameter steel arbor supported by ball bearings. Accurate cutting is further ensured by the solid cast-iron machine body.
  • Minimal Maintenance
  • The only regular maintenance required is to routinely fill the automatic lubricator.


  • Speed: Up to 5,000 tabs per hour
  • Sheet Size: Maximum:15 inches with a half inch inset on a 1 inch tab (381mm with a 12.7mm inset cut on
    a 25.4mm tab) Minimum:any width x 5-1/2 inches (139.7mm minimum depth)
  • Paper Weight: 6-point to 25-point paper 6 inches (152.4mm) maximum 1/2 inch (12.7mm) minimum
  • Tab Cut Size: Stepcut: 13-1/2 inches (342.9mm) maximum 1/4”, 3/8”, 1/2”, 5/8”, 3/4”
  • Stock Tab Extensions: (6.3mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm)
  • Knives: Hardened, precision ground steel
  • Electrical Requirement: 0.5 amp, 120 VAC, 50-60 Hz
  • Air Requirements: 2 cubic ft. per minute (944 cubic cm per second) at 80 lbs. pressure. Built in pressure
    regulator and filter allow use of shop air or separate compressor. permits variations in cutting power.
  • Ball Bearings of Bushings: All Moving Parts
  • Lubrication: Fully Automated
  • Table Top: 48 inches x 15-3/4 inches x 3/8 inches (1219 mm x 400 mm x 9.5 mm)
  • Table Height: (Adjustable) 39-1/2 inches (1003.3 mm0 maximum 32-1/2 inches (825.5 mm) minimum
  • Floor Space Required: 58 inches x 26 inches (1473.2 mm x 660.4 mm)
  • Shipping Weight: 335 lbs. (152 kg)