This item has been SOLD
Scott Heavy Duty Index Tabcutting Machine – 020222090240
Tabcutting Machine Specifications
Fast and Easy Setups
It takes just seconds to change tab positions. Changing tab sizes takes only two minutes.
Handles Many Size Sheets
The extra long steel knives quickly and easily cut a 1 inch (25.4mm) tab in the first position on a 15 inch long sheet.
Precision Cut a Variety of Tab and Step Cuts.
Adjust tabs to any width from 1/2 inch to 6 inches
(12.7mm to 152.4mm) by simply moving knives closer or father apart.
Safe and Easy Operation
The full length safety bar protects the operator’s fingers from knives while rapidly inserting sheet after sheet.
Knives are made from tool steel, hardened and precision ground. They are mounted on 2 inch diameter steel arbor supported by ball bearings. Accurate cutting is further ensured by the solid cast-iron
The only regular maintenance required is to routinely fill the automatic lubricator.
Speed: Up to 5,000 tabs per hour
Sheet Size: Maximum:15 inches with a half inch inset on a 1 inch tab (381mm with a 12.7mm inset cut on
a 25.4mm tab) Minimum:any width x 5-1/2 inches (139.7mm minimum depth)
Paper Weight: 6-point to 25-point paper 6 inches (152.4mm) maximum 1/2 inch (12.7mm) minimum
Tab Cut Size: Stepcut: 13-1/2 inches (342.9mm) maximum 1/4”, 3/8”, 1/2”, 5/8”, 3/4”
Stock Tab Extensions: (6.3mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm)
Knives: Hardened, precision ground steel
Electrical Requirement: 0.5 amp, 120 VAC, 50-60 Hz
Air Requirements: 2 cubic ft. per minute (944 cubic cm per second) at 80 lbs. pressure. Built in pressure
regulator and filter allow use of shop air or separate compressor. permits variations in cutting power.
Ball Bearings of Bushings: All Moving Parts
Lubrication: Fully Automated
Table Top: 48 inches x 15-3/4 inches x 3/8 inches (1219 mm x 400 mm x 9.5 mm)
Table Height: (Adjustable) 39-1/2 inches (1003.3 mm0 maximum 32-1/2 inches (825.5 mm) minimum
Floor Space Required: 58 inches x 26 inches (1473.2 mm x 660.4 mm)
Shipping Weight: 335 lbs. (152 kg)
GBC 111PM-3 Electric Comb PunchRead more
Baum 714 Ultrafold Air Fed Paper Folder – 081517010800Read more
Unibind U125 Single Thermal Binding MachineRead more
Rhin-O-Tuff CI 3000 Coil Inserter – 011618093745Read more
Akiles Roll-a-Coil Heavy Duty Electric Coil Inserter – 011118081359Read more
Lawson B3 Super Duty Paper DrillRead more