Mitsubishi Imaging Polyester Platesetter DPX 2 – 110520101820

Technology Recording Internal Drum Material capacity Rolls up to 200′ (61m)

Rip RipMate 7.x Exposure

Light Source 670nm visible red laser diode 10mW

Resolutions 900-3600 dpi

Spot Size 8-26µm

Plate Format PlateThickness 4 mil / 0.1mm – 8mil / 0.2mm Minimum 10″ x 10″ (250mm x 250mm) Maximum Std 16.5” x 21.6” (420mm x 550mm) Maximum w/upgrade 18.1″ x 21.6″ (460mm x 550mm)

Image Definitions Max image format 17.1″ x 21.4″ (436mm x 546mm) – with upgrade option Image

Repeatability 25µm / 0.001″ over 4 plates

Production Speed Plate size: 17.9″ x 20.7″ (454 x 525 mm) 3600 dpi 16 plates/hour 2540 dpi 20 plates/hour 1800 dpi 24 plates/hour 900 dpi 30 plates/hour

Punch Register Absolute ± 0.02″ / ± 0.5mm Relative ± ’25µm / 0.001″ Media lead edge to image ± 0.016″ / ± 0.4mm over 4 plates Media side edge to image ± 0.008″ / ± 0.2mm over 4 plates Processor 2 bath

Tank Capacity AC/ST 1.3 / 0.95 gallons (5.0 / 3.6 liters)

WasteTank Capacity 6.6 gallons (25 liters)

Plate Dryer Computer Controlled Temperature Range 86-122°F / 30-50°C

Options Landscape Punch 1 U hole + 1 square hole (220mm or 425 mm, field adjustable)

Portait Punch 1 U hole + 1 square hole (220mm)

Second Magazine Extended Plate Width Max Plate format: 18.1″ x 21.6″ (450 x 550 mm)

Max Image area: 17.1″ x 21.4″ (436 x 546 mm)

Pre-Installation Data Dimensions 42″x40.1″x53.9″(1066mm x1020mm x1370mm)

Net Weight 902 lbs (410kg)

Power Requirements 200 – 240 V, 50/60 Hz

Power Consumption 13 A / 200 – 230 V

Storage Environment Temperature 23-122°F / -5-50°C Humidity 80% RH, non-condensing

Operating Environment Temperature 65-82°F /18-28°C Humidity 25-80% RH, non-condensing