Mimaki CG-130SRIII 60in Cutting Plotter – 120324619003A

S/N 4009780

An optical sensor enables automatic consecutive detection of crop marks throughout the nested images. Together with the automatic adjustment function, it helps to achieve precise contour cutting. A light pointer easily adjusts the head position to the crop marks. By continuously detecting maximum of four points, nested images in both X and Y axis can be cut aligning each image automatically. With the half cut function, the backing sheet can be cut, leaving a few connection points, which hold the image in place after cutting. When finished the backing sheet can be easily detached.

Specifications:

• Acceptable sheet width 90-1,550mm (3.54″-61.0″)
• Effective cutting area *1 1,370mm (53.9″)
• Maximum cutting speed 85 cm/s (33.5″/s) (at the angle of 45)
• Adjustable speed range *2 1-10cm/s:1cm step adjustment (0.39″-3.94″ /s:0.39″ step adjustment)
• 10-60cm/s 5cm step adjustment (3.94″-23.6″ step adjustment)
• Repeatability 0.2mm / 2m (Excluding shrinkage / expansion caused by film temperature)
• Effective Repeatabilit 1,050mm x 2m 1,350mm x 2m
• Pen pressure 400g
• Range of down pressure Cutter 10-20g (2g step), 20-100g (5g step), 100-400g (10g step)
• Pen 10-20g (2g step), 20-100g (5g step), 100-150g (10g step)
• Acceptable sheet *3 Vinyl up to 0.25mm (0.01″) thickness,
• Fluorescent type vinyl, Reflective sheet
• Applicable tools *4 Cutter, Water based ball-point pen,
• Oil based ball-point pen, Pouncing tool
• Type of command MGL-IIc / Ic1
• Interface USB,RS-232C
• Receiver buffer size 30MB Standard
• Operational environment 5-35°C (41-95 °F), 35-75 %(Rh) Non-condensation
• Power requirement AC100 V-240V, 120VA or less
• Dimensions (WxDxH) 1,735mm (68.3″)x580mm (22.8″)x1,125mm (44.3″)
• Weight (with stands) 44kg (97.0lbs)