This item has been SOLD

Kluge EHE 14 x 22 Die Cutter / Embosser / Foil Press – 111022114003A

S/N: 52EHE147456G

Retail Price: $75,000.00

 

Often called “the workhorse of the industry”, the Kluge EHE is already a legend. Featuring speeds up to 3,300 impressions per hour, the EHE now comes with delayed delivery allowing it to accommodate sheets up to 17″x 24.75″ (431mm x 628mm), with up to 40 square inches of die area. Kluge’s patented Delayed Dwell technology allows the EHE to start on impression sooner, bottom out, and remain on impression longer­ doubling impression time with no loss of production speed and assuring flawless foil separation from the stock. A new, optional, freestanding mobile electronics console puts all press operations in one place for easy access. The same console can also serve as a workstation and toolbox.

Rugged, dependable and simple to operate, the EHE is known for providing years of reliable service in foil stamping, embossing and die cutting, and for over 25 years has been the standard by which all presses in its class are measured.

Features

  • With vacuum operated feed arm for smooth feeding of a wide range of stock types and thicknesses
  • Delayed Delivery – Allows stock greater than 14″ to be run on the EHE
  • Mechanical Foil Control System – Allows for a wide array of foil draw and coverage with highly accurate registration between images
  • Toggle Base and Die Heating Plate – Enables an infinite range of secure die mounting. Includes two heat zones
  • Micro Adjustable Gauge Band – Precisely adjust the gauge band for sheet placement
  • Delayed Dwell System – Increase impression time without decreasing the operational speed
  • Delivery – With receding stacker table. Will not mar stock and gives the operator accurate press usage
  • Dual Set Point Temperature Controls – Provides the operator with two temperature setting options – one for standby temperature and one for operating temperature
  • Feed Without Impression Control – Allows setup of feed and delivery without risking valuable dies and wasting expensive foil
  • Impression counter – Will only count the number of impressions for easy totaling of completed stock
  • Rotary Vacuum Pump – Allows independent control of the delivery vacuum
  • Auto Lubrication System – Provides hands off worry free lubrication of critical press bearings
  • Three-Nozzle Air Blast Foil Release – Separates foil web from the stock for improved product quality and increased productivity (requires a separate compressor or air system)
  • Complete Guarding with Electric Interlock System – Meets rigorous safety standards yet provides access to press
  • Variable Pitch – Feature of the standard Kluge magazine that enables the press to feedstocks of varying thicknesses (e.g. envelopes, single panel pocket folder)

Specifications

EHE Series English Metric

  • Platen size 14″ x 22″ 356 x 559 mm
  • Minimum sheet size 4″ x 5″ 102 x 127 mm
  • Maximum sheet size* 17″ x 24.75″ 431 x 628 mm
  • Magazine Capacity 14″” 356 mm
  • Delivery Capacity 14″ 356 mm
  • Air 90 psi @ 10cfm
  • Stock range Onion Skin to .200″ board
  • Inside Chase Dimensions 14″ x 22″ 356 x 559 mm
  • Outside Chase Dimensions 16.25″ x 23.5″ 413 x 597 mm
  • Main and Back Shaft Diameter 4.375″ 111 mm
  • Maximum operating speed 3,300 iph
  • Machine power required 3 h.p., A.C. 230/460 volt, 3 phase, 1800 rpm, 60 cycle
  • Machine dimensions 74″ x 50″ x 68″ 1880 x 1270 x 1727 mm
  • Net weight (approx.) 4400 lbs 1996 kg
  • Total weight (approx.) 5000 lbs 2268 kg

Call for Pricing! 888-837-8101