This item has been SOLD

Duplo DBM-250 Dynamic Booklet Maker – 112922000776A

Duplo Stitcher Folder DBM-250 (S/N: 990200993)

Booklet Making System Description

The system’s modular design offers a variety of convenient, cost-efficient configurations. Each of its towers comprises 1O bins, which allows for easy expansion to 20, 30, 40, 50 or 60 bins, depend­ing upon requirements. And unlike ocher collaring systems, the DC-10000S has no slave cowers. In addition to working together as a system, each of its rowers can operate as an independent unit, which allows multiple jobs to be run at the same time.
Push-button setup and changeover make the DBM-250 the world’s easiest-to-use stitcher/folder. Side guides, back joggers, stitcher heads, stitch stopper, fold stopper and fold-back stopper posi­tions all adjust automatically – with just the push of a button. Stitch position also is calculated automatically, based on the width of the booklet’s spine, and the operator can fine tune all areas in increments as small as .1mm. In addition, the DBM-250 features rugged Hohner stitching heads, which are the finest in the industry.

Booklet Making System Specifications

Trimming Mechanism: Upper and lower shearing action
Minimum/Maximum Booklet Sizes: 4.73″ x 3.35″ to 14.02″ x 9.84″ Minimum/Maximum Trimmed Booklet Sizes: 4.72″ x 2.95″ to 14.02″ x 9.84″ Trimming Margin 2.95″”
Cutting Thickness: Up to 48 sheets”
Speed: Up to 3,600 sels per hour’
Power Consumption: 120V 60Hz 8.SA
Dimensions (LxWxH): 49″ x 275″ x 42″ (with receiving tray)
Weight: 442 lbs.
Other Features: Jam detectors;adjustable bell infeed timing; interlocking safety cov­ers; adjustable knife speed controlled on panel; auto knife up/down; optional extended conveyor and batch kicker; bypass for documents that do not need a face trim; trim/no trim; resettable output counter; compressed air to trimmings tray; trim scrap-box-full sensor; drop-away flap for trimmings; lul I-width head stop and spine compression
Minimum/Maximum Sheet Size: 473″ x 5.52″ to 13.82″ x 14.41″
Paper Capacity: Up to 48 sheets*”
Speed: Up to 3,600 sets per hour•
Pre-set Paper Sizes for Automatic Set-up: Corner Stitch 8 1/2″ x 11″
Programmable Memory Settings: 8
Number of Stitcher Heads: 1-4 (2 standard); Hohner heads
Optional Connected Devices: DC-10000S Collator, DC-8000S Collator, DC-6000S Collator, DBM-250T Trimmer, DC-48TW Trimmer, and DC-48ST Stacker
Bookie/making Application
Minimum/Maximum Sheet Size: 4.73″ x 67″ to 13.82″ x 1972″
Paper Capacity: Up to 24 sheets”
Speed: Up to 3,600 sets per hour’
Pre-set Paper Sizes for Automatic Set-up: 8 1/2″ x 11″ and 11″ x 17″
Stitch Positions: Corner, side, top or saddle (or no stitch tor “told only’ applications)
Programmable Memory Settings: 8
Automatic Functions: Stitcher heads, back jogger, side guides, stitch stopper, fold stopper, and fold-back stopper positions
Power Requirements: 120V 60Hz BA
Dimensions: 62″ x 28″ x 37″ (LxWxH); 86 1/2′ x 28″ x 37″ (LxWxH) when connected to lift unit
Weight: 748 lbs.
Number of bins: 1 O, 20, 30, 40, 50 or 60
Paper Size: 4.7″ x 4.7″ to 14″ x 20″
Paper Weight: 11 lb. lo 10-pl. cover
Bin Capacity: 2.2″
Speeds: Up lo 5,000 sets per hour (front jogger attached)*; up lo 2,955 sets per hour (slacker allached)*
Power Consumption: 120V 60Hz 10A
Pump: 220V three-phase 60Hz 11.5A
Dimensions: Each module – 28″ x 30″ x 81″ (LxWxH) Air pump – 28″ x 22″ x 18” (LxWxH)
Weight: Each lower – 850 lbs Air pump – 200 lbs
Other Features: 5-digil counter: cover or slip sheet insert (1 or 2 sheets); automatic, 5-bin, 10-bin, alt and alt cover programs; 1/2-block, 1/3-block and 1/4-block functions; iront or rear exit; 4-step speed and overlap controls; double, miss, out-of-paper and jam detection; air suction-feeding system; paper separation by dual brush and two blasts of air; operator-adjustable detection sensitivity for varying ink and paper density (i.e recycled paper); remote control unit
Optional Connected Devices: DBM-250 Sticher/folder, DBM-250T Trimmer, DC-48TW Trimmer, DC-48ST Stacker, DBM-100 Bookletmaker, DBM-100T Trimmer, DC-12JR Rear Jogger, and DC-BOOOST Rear Slacker