Accufast Labeller XL w/ Accufast ET Tabber – 032624360009B

Accufast Labeller XL
Accufast XL Labeler MSRP: $4,560.00

S/N: 180690

Accufast ET
S/N: 880014

Accufast XL Labeler Postage Stamp Affixer Specifications

The XL is the best table top labeler on the market. Consider a few of its design features that translate into instant productivity and reliability.

  • The Labeling head slides from side to side allowing the label to be placed just about anywhere on the piece.
  • The head pops off for instant maintenance, cleaning and jam removal.
  • The built in feeder can feed pieces in portrait or landscape direction allowing for use as a labeler, stamp affixer or tab applicator.
  • It’s quiet
  • It’s built tough enough to do millions. Steel, no plastic.
  • Touch pad electronic controls.
  • Recommended use: Up to 25k pieces a month.


  • Proven for productivity and reliability, the XL is the best table top stamp affixer on the market.
  • Labels up to 15,000 pieces per hour
  • Applies stamps on a #10 envelope at a rate of approximately 6,000 per hour
  • Proven reliability and durability
  • Labels/Stamps pieces 5″ to 16″ wide, from 20 lb. thin to 1/4″ thick, coated and uncoated
  • Runs machine-grade labels/stamps 1″ to 4″ high, up to 6″ wide on backer with or without tractor holes
  • USPS stamp roll kit/roll adapter, minimum 1″ width, 3″ core, 10″ roll max diameter
  • No need to re-thread labels, splicing takes seconds
  • Labels/Stamps are applied in plain sight
  • Job set-ups are programmed and saved with up-to-the-minute digital electronics
  • Built-in diagnostics
  • Built-in waste take-up spool and counter
  • Hopper holds 100 envelopes
  • Holds up to 10k roll of stamps (Optional Stamp Kit required)
  • English and Metric units
  • Zip Code® at the push of a button
  • Weighs 69 pounds, Measures 20″l x 21″w x 16″h (25″ h with stamp kit)
  • Uses 115 volts 2 amps 60 Hz or 230 volts 1 amp 50 Hz
  • This machine is a complete “stand alone” machine but it can also work inline with other machines.
  • Sliding head for simple and exact label positioning
  • LCD status panel signifies jams, full take-up spool, exact label position and other conditions
  • Easy all-over access means quick maintenance
  • Outstanding feature of one-touch “on the fly” adjustment for all key positioning

Accufast ET Tabletop Tabbing Machine

The Accufast ET Double-Head Edge Tabber creates mail-ready pieces by applying multiple edge tabs per piece in various positions, processing over 15,000 pieces per hour. With user-friendly controls, it has the ability to change between 1” and 1.5” tabs simply by flipping a switch.

A variety of 1” and 1.5” tab stocks can be used, including clear, translucent and paper. Built-in waste take-up spools reduce down time, and for increased efficiency, tabs can be fed fan-folded or from rolls for higher volume. The Accufast ET can also be used in-line with other tabletop labelers, feeders, printers and folders.

With the addition of the optional Accufast HDF Heavy Duty Feeder, operators can input a stack of up to 12” of material to be tabbed, up to 3/8” thick. The optional  Accufast LDM High Volume Tab Delivery Module handles rolls of up to 150,000 tabs, which reduces down-time caused by reloading tabs. The optional Accufast 3FV Conveyor offers adjustable speed from 0 – 120 fpm, and stacks tabbed pieces in a neat, sequential order for easy removal.

Accufast ET

  • Speed: Tabs over 20,000 pieces per hour
  • Tabs Applied: Up to 3 tabs per pass
  • Document Sizes: 3.5″ x 9″ H x 5.5″ – 12″ W
  • Document Thickness: Up to .2″ thick
  • Tab Varieties: 1″ or 1.5″ tabs, clear, translucent or paper, circles or rectangles on rolls with or without tractor holes, high volume fan folded
  • Dimensions: 20″ L x 19″ H x 23″ W
  • Weight: 60 lbs.
  • Power: 115V, 4A, 60Hz or 230V, 2A, 50Hz

Click This Button To View The Lot

On Auction Now!