This item has been SOLD

2017 MGI JETvarnish 3DS & iFoil-S: Spot Coating with Inline Embossing/Hot Foil Stamping – 092622000602A

The MGI iFOIL S Digital In-line Embossing and Hot Foil Stamping System helps complement your MGI JETvarnish 3DS with inline embossing and hot foil stamping through a 100% digital process. Add foil with virtually no set-up and at high speeds, but also provide the ability to offer a new, never-before-seen finish; the personalization of embossed hot foil stamping.

Model: JetVarnish 3DS (S/N: JV3DS33102-062)

Model: IFoilS (S/N: 7216:S)


    • Create digitally-made embossed foil without the need for expensive dies
    • Variable data foil that is unique to the market
    • UV spot, 3D emboss and hot foil in one pass
    • In-line module that connects to the JETvarnish 3DS
    • Provides an unlimited choice of colors and glamorous effects
    • Embossing and debossing
    • Multiple colored foils applied in one pass (up to 2 colors)
    • Exclusive capability to foil and emboss on most matte or glossy laminated surfaces with or without aqueous coating, layered paper, plastic, PVC and other coated materials
    • Cost of production is a fraction of traditional analogue method


Production Speeds:

    Up to 2,298 A3 sheet size pages per hour (or 20 meters per minute) Speed will vary according to printing parameter used


    • Minimum: 8” x 11.8” (21 cm x 29.7 cm)
    Maximum: 14.33” x 10.15” (36.4 cm x 102 cm)

Substitute Thickness:

    • Minimum: 135 gsm and not less than 150 microns/6 mil before printing & lamination
    Maximum: 450 gsm and not less than 450 microns/18 mil before printing & lamination


    Foil finishing on most matte or glossy laminated surfaces, with or without aqueous coating, layered paper, plastic, PVC and other coated materials

Foil Rolls:

    • Standard 1” internal core.
    • Minimum / Maximum widths: 3.9” / 14.2”
    • Length: 1,300 feet (average)
    • Up to 2 rolls loaded simultaneously on the same holder
    Optional 3” internal core


    • From 21 up to 121 microns in thickness
    • From 21 to 242 microns in thickness
    JETvarnish 3DS T2 option required


    Online module that connects to all JETvarnish 3DS equipment