This item has been SOLD
2015 Horizon HT-1000V Three Knife Trimmer w/ PCV-1000V Position Conveyor – 031122008004B
The Horizon HT-1000V three-knife trimmer achieves zero make-ready on book trim size and thickness changes. Well suited for short-run production, and book of one production can also be achieved through barcode driven set-up.
Model: ECV-1000V (S/N: 003001)
Model: PCV-1000V (S/N: 000001)
Model: SSP-1000V (S/N: 001901)
Model: HT-1000V (S/N: 001901)
Automated set-up – The HT-1000V is set-up automatically on the fly by reading a barcode at the entrance of the trimmer. The system also is capable of automatic set-up from the operator panel for same size production runs.
Variable size trimming – One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable for true variable format production.
In-line Production – The HT-1000V can be placed in-line with Horizon perfect binders to maximize finishing automation and minimize human operation error.
High Speed Operation – Maximum cycle speed of the HT-1000V is 1,000 books / hr.
For example, A4 to A5 alternating sequence (book of one production) can be *950 books / hr.
(* Production speed depends on book condition and preparation of untrimmed books.)
JDF Workflow – The HT-1000V can be connected with the Horizon pXnet JDF workflow for finishing production efficiency and management.
Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600”
Limitation: The maximum length from the center to top or bottom is 175 mm/ 6.889”.
Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130”
Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”.
Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04”
Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04”Trim Height1 to 65 mm/ 0.04” to 2.560”Production Speed400 to 1,000 cycles per hour (Higher production can be reached with piled books.)
In case of the following trimmed condition, the production speed can reaches to 1,000 cycles per hour.
– Constant untrimmed size to constant finished size
– Constant untrimmed size to A4/letter size through A5/half letter finished size