This item has been SOLD

2014 Kama ProCut 76 Die Cutting and Stamping Machine

2014 Kama ProCut 76 Die Cutting and Stamping Machine

S/N 20-13-3-03
S/N 10-13-2-04

1641 Hours

4641657 Impressions

Die Cutting and Stamping Machine Description

Cutting, creasing, perfor­ating … most print products don’t really take their final shape until the post-press and finishing stage. The ProCut 76 die cutting and stamping machine is the profes­sional solu­tion for finishing in the sheet size B2 (760 x 600 mm).

Short set-up times, time-saving features and high-quality outputs make the flat-bed die butter a reli­able and cost-effective solu­tion for finishing in the commer­cial printing sector and beyond. With the KAMA AutoRe­gister, you can also cut and crease digit­ally printed sheets with high regis­tra­tion accuracy, allowing you to address the new market for short runs in pack­aging.

The versatile ProCut 76 is suit­able for many different applic­a­tions and is a perfect, state-of-the-art successor for worn-out cylin­ders and platen presses that are past their use-by date. And in the process, you can simply carry on using any tools you already have. The ProCut 76 is network capable and can be retro­fitted for use in hot foil stamping applic­a­tions.

Versatile applic­a­tions
Flex­ible & effi­cient – for small to medium runs.

Gentle sheet trans­port on a single level, clean creasing lines, embossing and cutting with highest regis­tra­tion accuracy and no nicks: the ProCut 76 is a flex­ible solu­tion for post-press finishing of paper, paper­board and plastics in the sheet size B2. The machine can be retro­fitted for hot cutting of plastics or for hot foil enhance­ments.

Fast conver­sion
Relevant for short runs and digital printing.

Fast order changes are abso­lutely essen­tial for smaller runs and digit­ally printed jobs. On the ProCut 76 it takes just around 5 minutes to convert the setup, which means that the next order can start up quickly – thereby making post-press finishing prof­it­able. The 4+1 system with prepared 1 mm plates also ensures that uptime is maxim­ised. With the type of repeat orders involving intensive creasing, which are common in pack­aging jobs, this can shorten set-up times by up to 90%.

Highest regis­tra­tion accuracy
… including for digit­ally printed and cut sheets.

With the linear KAMA gripper, ProCut die cutting and stamping machines achieve the highest regis­tra­tion accuracy on the market. The AutoRe­gister guar­an­tees the highest preci­sion for digit­ally printed sheets and for sheets that are cut after printing. At aligns every sheet based on the print image, and cutting and creasing lines are accur­ately posi­tioned to within an accuracy of a tenth of a milli­metre.

Continue using your existing tools
Smooth trans­ition to the new solu­tion.

Thanks to the universal chase on the ProCut 76, you can continue to use your existing tools without any prob­lems what­so­ever. This also applies to small cutting dies.

Paper from 100 g/​m²
Paper­board, micro-corrug­ated board max. 1,500 g/​m² (bzw. 1.8 mm)
Plastics (PET, PP, PVC) max. 1,500 g/​m²
Maximum sheet size 760 x 600 mm (29 15/​16 x 23 5/​8 in)
Minimum sheet size 279 x 210 mm (11 x 8 1/​4 in)
Speed* 5,500 sheets/​h
Cutting force 165 t (1.65 MN)
Maximum cutting size 743 x 585 mm (29 3/​8 x 23 1/​16 in)
Gripper margin 10 mm
Dimen­sions (length x width) 4.87 x 2.69 m