2009 Challenge Titan 265 XG 26.5in Hydraulic Programmable Paper Cutter w/ Safety Lights – 100424577001B

Cut Count: 95,104

S/N: 091830

Today’s print market places great demands on your business. Investments in cutting-edge wide format, inkjet, and digital print engines ensure you meet your customer’s needs.  The Titan 265 is based on a solid cast iron and steel construction for maximum durability. Industry-exclusive UHMW gib surfaces, composite bushings, and a one-inch thick solid metal table require virtually zero maintenance for years of trouble-free operation. With powerful hydraulic clamping and cutting yield up to 26 cuts per minute! Stainless steel table surface and an air table are available options for the Titan 265.

Clamp mark waste is reduced or eliminated with programmable electronic clamp pressure control per cut. Innovative advances improve the task of program creation through features such as repeat and loop commands, USP port for thumb drive program delivery, network capable hardware with an Ethernet port, label cutting and sheet division tools, and more.

Features

• Up to 26 cuts per minute
• Virtually maintenance-free design
• Solid 1-inch thick metal table offers the strong work surface required in production environments
• Trim business cards with the false clamp plate installed reducing unwanted waste
• Low-pressure pre-clamping reduces operator injury (less than 66 PSI)
• JDF and network capable hardware
• Electronic Clamp Pressure control
• USB port for simple thumb drive program entry
• Ability to receive .csv files making offline programming and memory storage simple
• Repeat and Loop commands streamline program entry
• Auto-programming features of sheet division and label cutting with animated graphics
• Programmable Clamp pressure per cut
• Automatic Fraction to Decimal Conversion
• Unlimited program storage capacity
• Program Lockout
• Computer Diagnostic Tools

Specifications

• Maximum Cutting Width: 26-1/2″ / 67.3cm
• Minimum Cut: without false clamp plate 5/8″ / 16mm –  with false clamp plate 1-7/8″ / 48mm
• Maximum Cut Depth: 28″ / 71.1cm
• Clamp Opening: without false clamp plate 4″ / 10.2cm –  with false clamp plate 3-3/4″ / 9.5cm
• Clamping MethodC Hydraulic and Manual
• Backgauge Control Power
• Table Space:  in front of knife 18-1/2″ / 47cm – behind knife 28″ / 71.1cm
• Overall Height 59″ / 150cm
• Overall Width 54″ / 137.2cm
• Overall Length 69-1/2″ / 176.5cm
• Net Weight (approximate) 1780 lbs / 807 kg
• Shipping Weight (approximate) 2020 lbs / 916 kg
• Standard: 5 H.P. 3 Phase, 60 Hz, AC 208/230 Volts, 25 Amps (service size 30 Amps) U.L. Listed