This item has been SOLD
2003 Foliant 520T Roll Laminator – 121419091530
2003 Foliant 520T Roll Laminator
The FOLIANT 520T is a simple manual laminating machine, designed with an operating width of 520 mm. It represents an ideal choice for a professional in-house single side lamination in small offset and HP Indigo printing shops printing and processing sheets up to B2+ size. Maximum speed is up to 7 meters/min. The machine’s main feature is a small floor space (90 x 117 cm), one single phase 220 – 240 V supply cable, a nice design and an easy machine operation. The Modular Stand is supplied optionally.
The FOLIANT 520T laminator maximum sheet size is 52 x 74 cm (the length of laminated sheets is not limited, in practice lamination it is ~90 cm). The minimum sheet size is 30 x 25 cm (A4). The roll of a film is mounted on an easy handle shaft with a film tension control breaker. The shaft capacity is up to 3000 m of the 24 – 31 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel. The laminating process is done between two laminating rollers – an upper heated silicone roller, and a lower hard rubber pressure roller. The laminating roller is heated with an infra-red heating spiral, with a sensitive contact temperature sensor. The pressure is mechanically adjustable to achieve the pressure between the laminating rollers. The laminating unit is equipped with an adjustable decurl unit.
Maximal Speed: single side 7 m/min.
Feeding System: Manual
Paper Weight: 115–350 g/m²
Main Roller Pressure System: Coil springs
Minimal Sheets Size (w×l): 30×25 cm
Maximal Sheets Size (w×l): 52×75 cm
Maximal Performance: 600 B2 / hod.
Temperature Control: 80–140 °C, Warming Up Time 5 min
Power Supply: 230 V AC, 50-60 Hz
Power: 1000 W
Mechanical Parameters: Floorspace (w×l) 90×117 cm, Weight: 100 kg