Horizon HT-70 Three-Knife Trimmer – 050124441001A

Model: HT-70

Cutting Size: A6 – A4

Power: 220V 60HZ 2.9KW

S/N: 009016

The Horizon HT-70 is an in-line or off-line three-knife trimmer that produces precise, clean cuts with no rough edges at speeds up to 1,000 cycles per hour. The LCD display console steps the operator through set-up and changeover, and provides continuous updates on system status. The HT-70 will accept a variable lift size up to 50 mm (2”) thick. Changeovers are accomplished in under 10 minutes, and all adjustments are external to the knife area for added safety. An advanced interlock system provides enhanced operator safety.

Features

• Space-saving Design
  • The HT-70 is capable of doing big jobs but requires only a small amount of floor space, taking up 1/3 less space than all its competitors.
• Easy Operation
  • The liquid crystal display panel gives simple instructions for guidance and ease in operation; no experience required.
• Quick Adjustment
  • to Book Size The HT-70 is quick to adjust to book size, taking less than 10 minutes per adjustment. To add, for ease and safety, the cutting base does not require removal or replacement, while the top and bottom guards can be adjusted from outside the machine.

Functions

• BOOKLET FEEDER
  • One or more booklets up to 5 cm in total height can be fed into the HT-70 at one time.
• CHANGE-OVER PROCESS
  • Size adjustments for various booklets are easily controlled by the simple alteration of the right-hand tab, which slides out for further ease and safety.
• TRIMMING PROCESS
  • The cutting knives fall at a 30 degrees angle for precise, clean cuts that leave no rough edges. The clamps adjust to the weight and delicacy of the paper stock by applying the correct pressure from a range of 150 kg to 1,000 kg Air holes in the knives blow away any paper trimmings for easy clean-up and maintenance.
• CONTROL SYSTEM
  • The liquid crystal display panel is designed to monitor every step of the trimming process, checking for errors and providing information for smooth, continuous runs.
• CONVEYOR SYSTEM
  • The delivery belt lifts up to carry away the finished booklet to the conveyor belt, keeping them in neat, aligned piles.

Specifications

• Untrimmed Book Size: (Max. 330 x 330 mm (12.99” x 12.99”)) (Min. 148 x 105 mm (5.83” x 4.14”))
• Trimmed Book Size: (Max. 300 x 300 mm (11.81” x 11.81”)) (Min. 142 x 100 mm (5.60” x 3.94”))
• Trim Thickness: Max. 50.8 mm (2.0”)
• Standard Size Trimmed by Standard Accessory: A4T / A4Y / A5T / A5Y / A6T / B5T / B5Y / B6T (T: Portrait, Y: Landscape)
• Clamp and Pressure: Hydraulically Operated; Steplessly variable adjustment within the range from 1.5 to 9.8 kN (150 to 1,000 kgf)
• Production Speed: Max. 800 cycles/hr. (A4T)
• Table Height: 865 mm (34.0”)
• Voltage / Frequency: 3-Phase 200 V, 50 / 60 Hz 3-Phase 220 / 240 V, 60 Hz 3-Phase 380 / 400 / 415 V, 50 Hz
• Rated Current: 200 V, 50 / 60 Hz, 8.9 / 8.5 A 220 V, 60 Hz, 9.7 A 240 V, 60 Hz, 7.0 A 380 V, 50 Hz, 6.3 A 400 / 415 V, 50 Hz, 6.0 A
• Power Consumption: 200 V, 50 / 60 Hz, 1.2 / 1.6 kW 220 V, 60 Hz, 2.85 kW 240 V, 60 Hz, 2.19 kW 380 / 400 / 415 V, 50 Hz, 3.3 kW
• Heat Output: 3,190 kJ (760 kcal)
• Motors: 1.5 kW x 1 / 0.75 kW x 2 / 60 W x 1 / 25W x 1
• Machine Dimensions: 1,160(W) x 2,260(D) x 1,600(H) mm (45.7” x 89.0” x 63.0”)
• Noise Level: LA peak : 91.1 dB / LAeq : 77.9 dB
• Machine Weight: Main Body : 1,530 kg (3,373 lb.) Main Body : 1,530 kg (3,373 lb.)